Note Points when Adjusting Light Conveyor Belts

Light conveyor belts are a type of solid material conveyor belts with lighter materials, mainly including PVC conveyor belts, PU conveyor belts, rubber and plastic conveyor belts, etc. They are widely used in various industries, such as food, logistics, electronics, tobacco, wood, stone, fitness and other fields.

Light conveyor belts are usually made of polyester fibers with different warp and weft interwoven into a skeleton material, and then compounded with rubber materials or PVC, PU, ​​PE, etc. This structure gives light conveyor belts good adhesion, physical, chemical and mechanical properties. Depending on the use environment and needs, light conveyor belts can also have flame retardant, anti-static, food grade and other properties.

During installation and use, some key details need to be paid attention to. For example, during installation, make sure that the conveyor belt interface is running in the forward or reverse direction, depending on the working conditions of the machine. In addition, the extension of the conveyor belt must be adjusted, because during use, the conveyor belt will have a retraction process, so it should not be adjusted too tight during the first use, and it needs to be adjusted to the applicable state after running for a period of time.

In general, light conveyor belts are an efficient and flexible material handling solution that can meet the needs of many different industries and applications.

When adjusting light conveyor belts, you need to pay attention to the following details:

Determine the running direction of the conveyor belt: When installing the conveyor belt, you need to determine the running direction of the conveyor belt to ensure that the conveyor belt can run in the correct direction.
Adjust the tension of the conveyor belt: The tension of the conveyor belt is very important for the running stability and service life of the conveyor belt. When adjusting the conveyor belt, you need to adjust the tension of the conveyor belt according to the actual situation so that the conveyor belt is neither too tight nor too loose.
Ensure the centering of the conveyor belt: The conveyor belt needs to be kept centered during operation to avoid deviation or wear of the conveyor belt. When adjusting the conveyor belt, you need to check the centering of the conveyor belt and adjust it in time.
Check the wear of the conveyor belt: When adjusting the conveyor belt, you need to check the wear of the conveyor belt, especially the edges and joints of the conveyor belt. If severe wear is found, it needs to be replaced or repaired in time.
Adjust the position of the conveyor belt: When adjusting the conveyor belt, you need to adjust the position of the conveyor belt according to the actual situation to ensure that the conveyor belt can properly engage with the drive wheel and the driven wheel.
Ensure safety: When adjusting the conveyor belt, you need to pay attention to safety to avoid accidents. Especially when adjusting the high-speed conveyor belt, you need to take necessary safety measures.
In short, when adjusting the conveyor belt, you need to pay attention to multiple details to ensure that the conveyor belt can run stably and efficiently. At the same time, specific adjustments and maintenance need to be carried out according to actual conditions.