Introduction of skirt baffle conveyor belt

With the development of industry, light skirt conveyor belts have been gradually applied in the food, tobacco, medicine, agriculture and other industries. Light skirt conveyor belts are made of thermoplastic elastomers such as PVC and PU by high-frequency welding. They are flexible to process and have a wide range of applications.

Skirt conveyor belts are a set of conveying systems, which are divided into two types: conveyor belts with skirts and no partitions and conveyor belts with skirts and partitions. It can continuously convey various bulk materials at any inclination angle of 0-90 degrees, with large conveying inclination angle, wide range of use and small footprint. At the same time, it also has the characteristics of reducing civil engineering investment, low maintenance cost, large conveying volume, etc., solving the conveying angle that ordinary conveyor belts or patterned conveyor belts cannot achieve.

Skirt conveyor belts are mainly composed of the following parts:

1. High-strength and high-wear-resistant base belt with greater lateral stiffness and longitudinal flexibility.

2. Horizontal partitions for objects to slide down.

Skirt sidewall conveyor belts can convey various bulk materials such as food, fertilizers, grain, etc. in horizontal, inclined, vertical and variable angle directions. The particle size of the material is unlimited, ranging from very small to large 400mm, and the conveying capacity can be from 1 cubic meter/hour to 6000 cubic meters/hour.

In order to increase the service life of the skirt conveyor belt, the following matters should be noted during the use of the skirt conveyor belt:

1. Avoid the rollers being covered by materials, causing poor rotation, prevent leakage from getting stuck between the roller and the belt, pay attention to the lubrication of the moving parts of the conveyor belt, but do not oil the conveyor belt;

2. Prevent the conveyor belt from starting under load;

3. If the conveyor belt deviates, timely measures should be taken to correct it;

4. When the conveyor belt is found to be partially damaged, artificial cotton should be used to repair it in time to avoid expansion;

5. Avoid the conveyor belt from being blocked by the frame, pillars or block materials to prevent it from being broken and torn.

The above is some introduction to the skirt conveyor belt, I hope it will help you understand the skirt conveyor belt.